Inzane 17

brake fluid/clutch fluid

Started by slider, Sat 10, Aug 2013, 10:33:08

Previous topic - Next topic

slider

yesterday noticed a few drops of brake fluid under the clutch housing of the lady,the clutch resv was a bit low as well.The clutch cover bolts were about 1/2 turn loose all the way around.,the question is would this cause the leak or should I think about replacing the slave cylinder for the clutch?It is the original clutch and works great and I assume slave is original as well.It has never been low before and the fluid is flushed everyother year.Any input from you  is welcome.
a proud navy veteran

vanagon40

You might send a PM to Squealy.  He just had a similar ordeal.  See this thread.

Patrick

It really shouldn't leak, unless, its loose enough to put enough side stress on it to allow fluid past the the seal. I think I would just tighten it up, add fluid if needed, maybe bleed it and then run it to see what happens.

Ricky-D

If the clutch cover (housing) were loose, you would be seeing motor oil, not brake fluid.

***
2000_Valkyrie_Interstate

9Ball

I'd imagine he was referring to the clutch master cylinder cover...different animal.

Just a guess.
VRCC #6897, Joined May, 2000

1999 Standard
2007 Rocket 3
2005 VTX 1300S

slider

sorry guys it was the clutch master that I was refering to since I tightened it up it havent seen anything else leaking,,problem solved I hope.Thanks to all of you.
a proud navy veteran