What size is the valve stem

[BIG--T]

on the Valkyrie? I am wanting a 90 degree and found some chrome at Jake Wilson for $2 each but skeptical because the other ones are between $12- $20. Is anyone familiar with them? But I do need a size. On one site I had to choose between an 8 or 10, another 453" hole!?

Thanks

http://www.jakewilson.com/p/52/-/343/753/-/19082/Myers-90%C2%B0-Tubeless-Chrome-Valve-Stem?term=valve stems

[HayHauler]

Those are the good ones that tighten from the outside.  That way if they need a little snugging, you can do it without breaking the bead.

Hay 
Jimmyt

[BIG--T]

Those are the good ones that tighten from the outside.  That way if they need a little snugging, you can do it without breaking the bead.

Hay 
Jimmyt

Thanks Jimmy for the quick reply as I'm in the process of ordering some...at $2 a pop is a deal compared to the others!

Do you know the size I need? 8, 10, 453"?

[Gryphon Rider]

0.453"

[Spirited-6]

Those are the good ones that tighten from the outside.  That way if they need a little snugging, you can do it without breaking the bead.

Hay 
Jimmyt

I`m sorry but how in the hell can you work from the OUT SIDE to tighten . I wish some one would shop me this. :-(

[Hoser]

Those are the good ones that tighten from the outside.  That way if they need a little snugging, you can do it without breaking the bead.

Hay 
Jimmyt

I`m sorry but how in the hell can you work from the OUT SIDE to tighten . I wish some one would shop me this. :-(

Study the picture, the nut is on the outside.  Hoser
http://www.jakewilson.com/p/52/-/343/753/-/19082/Myers-90%C2%B0-Tubeless-Chrome-Valve-Stem?term=valve

[BIG--T]

0.453"

Thanks Bro, then I ordered the right one!

[donaldcc]

I have the $2 JakeWilsons and they are great.  can't beat that price.

[BIG--T]

I have the $2 JakeWilsons and they are great.  can't beat that price.

That's exactly where I ordered mine! 

[HayHauler]

Those are the good ones that tighten from the outside.  That way if they need a little snugging, you can do it without breaking the bead.

Hay 
Jimmyt

I`m sorry but how in the hell can you work from the OUT SIDE to tighten . I wish some one would shop me this. :-(

The flange is on the inside of the rim and the nuts are on the outside.  These are not the PatchBoy stems I have seen in the past.

Hay 
Jimmyt