grabrail bolt sizes?

[whitewater]

I pulled off saddle bags,backrest and rear seat, grab rail bolts are too long now, any help on the size  and availability? lowes, home depot ?

[pancho]

I believe the rear ones are 8X45, and the front ones are 10X50 with nothing else mounted there. Any bolt and screw place.

[whitewater]

Thanks Pancho, Sure appreciate the help! I'm headed next month to daytona bike week, I just gotta get out of this snow here in Ohio. Thought I'd Go solo on the old girl and needed the sizes so I could get to Mr. Bolt in the A. M. to pick up the bolts to finish out the little project. Thanks again.

[pancho]

You bet,,, I would like to be going with you brother,, been awhile since I last went.  That will be a nice escape from winter in Ohio.  Ride safe

[sandy]

The 8 is a 1.25 pitch. The 10 is the same pitch, 1.25 ( fine thread).

[John Schmidt]

Create your own "quick drop" kit for those bolts. Then all you have to do is remove two nuts on each side of the fender and the entire bag support comes off. You're going to have a headache putting those bolts back in if you took all of them out at the same time.