4way Flashers

[desanshe]

Good Evening All:
Again, I request information from you guys.

Our motorcycle club does a great deal of escorting for bicycle races and we are supposed to have "4way Flashers"and my 99 Valk IS does not have them.

It seems to me that I have seen a kit for sale at one time or another.  Can someone please help me out.

Thanking you all in advance
Roger

[woody]

Try this
http://www.rattlebars.com/valkfaq/circuits.html

have fun

[Thunderbolt]

under the right side cover the wiring that heads toward the rear of the bike has in it an orange and a blue wire.  These are the turn signal wires.  This is where you want to attach the 4 way wiring.  Just go to your auto parts store and get a 2 prong 12V flasher and a small switch and a fuse.  Wire it like the diagram.  Works like a charm.  I used a small switch from Radio shack and mounted it in the center panel near the key that unlocks the seat, nearer the right side.  When you turn the switch on, it puts 12V from the battery through the fuse,through the flasher to both turn signals.

[PAVALKER]

Try this
http://www.rattlebars.com/valkfaq/circuits.html

have fun

I did the Rattlebars mod and applied the power to the switch in the Center lead, that way I can use the switch for 4 ways in one position, LEDs in the other position and of course OFF in the center position.  Can't have LED's and flashers on at the same time obviously.

[mooserider]

I installed the 4 way flashers on my tourer tonight, I'm very happy with it. I installed my switch on the center panel next to the key hole. total cost maybe 5 dollars. I used the rattler brothers instructions. 

[Robert]

Kisan signal minder has 4 ways parade flash and cancels turn signals plus much more.If you have leds for the turn signals you don't need a extra module to get them to flash.
https://www.kisantech.com/index.php?cat_id=4