Clutch problem

[Bonzo]

The temp hit 38 so I rolled out the bike, started it up, let it warm up Squeezed the clutch,  engaged first,  it lurched and stalled. Clutch fluid was down real low. Took of the Switch top (it was on real tight) Filled the fluid and closed. I could not build up pressure. I could see no leaks and the Fluid lines move when you squeeze the clutch, put there is no clutch. Any ideas?

[Chrisj CMA]

Air in the line.  Not sure what to tell you about where the fluid went, but you need to bleed the system

[Bonzo]

researching that now, Thanks!