VRCC Calendar Ad

change tire while traveling

Started by al v, Tue 07, Apr 2015, 22:42:04

Previous topic - Next topic

al v

Has any figured out a simple way to lift the bike while traveling if you needed to pull a wheel to get a tire changed or change a wheel bearing?

With a pull behind trailer, just wondering if there are any solutions. I'm thinking a full size lift would be too much. So short of that, has any one figured out a light weight solution/technique that packs well.

Prior to having a trailer, I have relied on and used my progressive insurance towing service to get to a shop.

Oss

rivco center stand to get the rear tire done

Dont have one but I know a Texan who changed a tire in Alaska that does

Come to Inzane and maybe he will do a tech session, maybe not 

If you don't know where your going any road will take you there
George Harrison

When you come to the fork in the road, take it
Yogi Berra   (Don't send it to me C.O.D.)

wiggydotcom

Quote from: Oss on Tue 07, Apr 2015, 23:16:42
rivco center stand to get the rear tire done

Dont have one but I know a Texan who changed a tire in Alaska that does

Come to Inzane and maybe he will do a tech session, maybe not 



+1 on that Texan who, unlike everything else in Texas, is not so big anymore.
VRCC #10177
VRCCDS #239

old2soon

Quote from: wiggydotcom on Tue 07, Apr 2015, 23:26:04
Quote from: Oss on Tue 07, Apr 2015, 23:16:42
rivco center stand to get the rear tire done

Dont have one but I know a Texan who changed a tire in Alaska that does

Come to Inzane and maybe he will do a tech session, maybe not 



+1 on that Texan who, unlike everything else in Texas, is not so big anymore.

Russ-all too RARELY on this forum do we hear a GOOD "zing"!  :2funny: THAT wuz a god zing.  :cooldude: RIDE SAFE.
Today is the tommorow you worried about yesterday. If at first you don't succeed screw it-save it for nite check.  1964  1968 U S Navy. Two cruises off Nam.
VRCCDS0240  2012 GL1800 Gold Wing Motor Trike conversion

Jess from VA

I have read that in an emergency, the bike can be laid over on it's side and the tire pulled and changed.

This sounds pretty tricky on the rear... pulling out the axle (among other things).  I carry extra tools, but not sure if I'd have everything I would need.

Outside of tire repair you can do on the bike, you won't have a spare tire, and will still have to get one, somewhere.

John Schmidt

Since I got my centerstand years ago, I've never used a lift to change/pull the rear wheel. The c/s stand puts the wheel a couple inches off the ground and that's all that's needed once you pull the rear half of the fender. In my shop I usually pull everything off the back; bags, rails, shocks, etc.  Gives you a chance for some good cleaning and makes rear end service a breeze.