VRCC Calendar Ad

What did you do to your Valkyrie today?

Started by Houdini, Fri 24, Apr 2015, 10:17:15

Previous topic - Next topic

Joevalk

A lil longer and you'll be able to put a site glass in there :uglystupid2:
I have a whole interstate I can sell you, so you can get the rear caliper off it :uglystupid2:
VRCC#32720
1999 Blk/Silver Tourer (Valkylac)
1999 Grn/Silver Interstate
1999 Blk/Silver (Texas Bobber)
http://vrcc.photostash.com/vrcc_32720/xcd%2002022.jpg

Disco

2000 Bumblebee Tourer, 98 Yellow & Cream Tourer, 97 Rescue blower bike
22 CRF450RL, 19 BMW R1250RT
78 CB550K, 71 MT50 Trailhopper


VRCC 27,916                  IBA 44,783

Houdini

Quote from: Disco on Sun 18, Oct 2015, 20:30:51
WOW!  How do you explain that?

Well, I can explain it now after pulling off the other side and giving everything a good look. but instead of naming names I'll just blame the stoopid mistake on "the guy" that does the maintenance on my bikes.

The spacers were on the right side and not the left side.  I guess that guy that does all of my maintenance installed the right side first and when I, err, he got to the left side there were no spacers to install so just bolted it all up.   :-[

I knew there were no left over spacers last time the bags and supports were off.   :tickedoff:
"A Camera And A Bike....What More Do I Need?


RainMaker

Quote from: Houdini on Mon 19, Oct 2015, 10:23:20
Quote from: Disco on Sun 18, Oct 2015, 20:30:51
WOW!  How do you explain that?

Well, I can explain it now after pulling off the other side and giving everything a good look. but instead of naming names I'll just blame the stoopid mistake on "the guy" that does the maintenance on my bikes.

The spacers were on the right side and not the left side.  I guess that guy that does all of my maintenance installed the right side first and when I, err, he got to the left side there were no spacers to install so just bolted it all up.   :-[

I knew there were no left over spacers last time the bags and supports were off.   :tickedoff:

Don't be too hard on your maintenance guy.  After all, he did catch it before it became a road accident/issue.


2005 BMW R1200 GS
2000 Valkyrie Interstate
1998 Valkyrie Tourer
1981 GL1100I GoldWing
1972 CB500K1

Houdini

#164
Tore the front end off....



"A Camera And A Bike....What More Do I Need?


f-Stop

New rear tire and rear end service...

Just before packing moly paste and just before 60,000 miles...


I also replaced the dampers and thrust washer...
 
Had my blinker on across three states!

Houdini

#166
All parts have arrived but one



Luckily I don't have to wait for it.  Now for the scary part, rebuilding my first pair of forks (I may be asking for assistance if I lose my confidence).
"A Camera And A Bike....What More Do I Need?


Disco

Those look great, Chuck!  One-coat gloss black?  Flat + clear?  Did your coater require the sliders be removed from the lowers before coating or did he do them with the sliders attached?  Mine wants them disassembled.
2000 Bumblebee Tourer, 98 Yellow & Cream Tourer, 97 Rescue blower bike
22 CRF450RL, 19 BMW R1250RT
78 CB550K, 71 MT50 Trailhopper


VRCC 27,916                  IBA 44,783

Houdini

#168
Quote from: Disco on Wed 13, Jan 2016, 11:29:19
Those look great, Chuck!  One-coat gloss black?  Flat + clear?  Did your coater require the sliders be removed from the lowers before coating or did he do them with the sliders attached?  Mine wants them disassembled.

Gloss black with clear on the forks and turn signal clamps, he did not require the sliders to be removed and did a beautiful job again (second time I've used them).  Single coat of dark red on the calipers, no clear coat.

I inquired on the tech board about removing the tubes and the response was I'd probably destroy them before getting them apart; one guy that wanted just the bottoms because the tubes were bent even tried using a pipe wrench and was unable to get them to unscrew.  I called my PC guy and he said bring 'em as is.

Crosslink McKinney
http://www.crosslinkmckinney.com/
Don't use them, they SUCK.
"A Camera And A Bike....What More Do I Need?


Disco

2000 Bumblebee Tourer, 98 Yellow & Cream Tourer, 97 Rescue blower bike
22 CRF450RL, 19 BMW R1250RT
78 CB550K, 71 MT50 Trailhopper


VRCC 27,916                  IBA 44,783

BigTex

New 4 piece King Ultimate Seat set ordered, for my 2003 Standard

cant wait, love the way they look and the way everyone says they ride.

bigtex

Houdini

#171
Spent the day in the garage getting my standard back together.

I like the look




All I need is to get the Batwing reinstalled and the front brakes are a little soft and need more bleeding
"A Camera And A Bike....What More Do I Need?


BigTex

well I did it,

ordered complete set of seats from Ultimate. Ouch on the $

Bike also getting spring tune up, carb work and all services. 

should run like a new one,,, with only 12K I do feel like its new.

Ride on,

bigtex




Valkpilot

Quote from: Houdini on Sun 31, Jan 2016, 00:15:31

Spent the day in the garage getting my standard back together.

I like the look


All I need is to get the Batwing reinstalled and the front brakes are a little soft and need more bleeding


Looking good, Chuck.
VRCC #19757
IBA #44686
1998 Black Standard
2007 Goldwing 
 
   

SteveC

Did the first oil change at 2600 miles. 
Then rode from Waikiki to the north shore of Oahu while everyone else was at the Pro Bowl.

Steve

RainMaker

Quote from: Houdini on Sun 31, Jan 2016, 00:15:31
Spent the day in the garage getting my standard back together.

I like the look


It's looking incredible.  Kind of a British look, in my opinion.  Nicely done.


2005 BMW R1200 GS
2000 Valkyrie Interstate
1998 Valkyrie Tourer
1981 GL1100I GoldWing
1972 CB500K1

Red Diamond

Quote from: Houdini on Sun 31, Jan 2016, 00:15:31
Spent the day in the garage getting my standard back together.

I like the look




All I need is to get the Batwing reinstalled and the front brakes are a little soft and need more bleeding

Great work and insight Chuck. Mine is just waiting for your pen and your money.

If you are riding  and it is a must that you keep your eyes on the road, you are riding too fast.

Disco

2000 Bumblebee Tourer, 98 Yellow & Cream Tourer, 97 Rescue blower bike
22 CRF450RL, 19 BMW R1250RT
78 CB550K, 71 MT50 Trailhopper


VRCC 27,916                  IBA 44,783

chauffeur

Have seen a lot of Valkyries in the past 10 years and have always been impressed by the owners that venture outside the norm to make it their "own".  Nice job, Chuck.  Looks great!

MarcusS

#179
Installed LED headlight. Was a paid cause the wire clips would not work. Had to make new wire spring clips to holt them in.



Need to find someone in Houston area at night with another IS so we can compare.

They are too bright to look at and probably illegal.

That is a fan on the back side that you actually hear when you turn on the key.  The current draw is so low that I am getting 14.2 VDC on my digital volt meter.

Yes the wire did come from a coat hanger.





CRYON is the mfg./distributor


http://www.cyron.com/p-209-headlight-bulb-led-retrofit-kit-motorcycles-abh4k.aspx

Life goes on whether you are in it for the ride or not.

Houdini

QuoteLooking good, Chuck.
Thanks VP

QuoteIt's looking incredible.  Kind of a British look, in my opinion.  Nicely done.
Thanks RM

QuoteGreat work and insight Chuck. Mine is just waiting for your pen and your money.
Eli, there's a reason this has been on ongoing project for two years....
Have I thanked you recently for introducing me to this fat gurl?  If not, thank you, it sure has been fun.

QuoteLooks great, Chuck!   :cooldude:
Thanks Disco

QuoteHave seen a lot of Valkyries in the past 10 years and have always been impressed by the owners that venture outside the norm to make it their "own".  Nice job, Chuck.  Looks great!
Thank you Chauffer

Now out to the garage to get the Batwing back on and finish up any little details I've overlooked or under tightened.
"A Camera And A Bike....What More Do I Need?


Beardo

I bet you Texas boys are jealous of us Canadians who get 6 months of downtime in the winter to work on the bike and not have to worry about missing any riding.  ;D

Nice work. I enjoy threads like this where you can see some little and some big things everyone has done to their bikes.  :cooldude:

big poppa pump

Finish installing an Audiovox Cruise Control on my Hotrod.






VRCC#35870
VRCCDS#0266
1998 Valkyrie Hot Rod


hubcapsc

#183
I added more Cobra chrome... I'd never seen these pivot covers made from
billets before, I got a used set a few years ago, one had bad chrome... a friend recently
got it rechromed for me...

Before:



After:



I hope I used enough tape  :coolsmiley:



Oh... and I fiddled with my brake master cylinder cover and got it on there straight too...

-Mike

Houdini

#184
Another day of riding lost to garage time.

Installed the Batwing, took longer than usual due to trying not to scratch up the powder-coating.

Didn't get the Batlashes working yet, I must have bumped something in the light bucket and have no power to them.


The rest of the LED's are working now.




I really like my Mustang bib and really like my filler cover but they wouldn't happily live together, I finally decided to start cutting the bib until I had it trimmed enough to mount the cover over it.


Me like!



"A Camera And A Bike....What More Do I Need?


Houdini

#185
I installed and wired up a Back Off license plate



I'm done wrenching and wiring for a while.
"A Camera And A Bike....What More Do I Need?


Joevalk

Looken good :cooldude:
But why not more red lights in the front instead of blue?
I'd like to find me some lights that you have behind you front crank bolt cover :cooldude:
VRCC#32720
1999 Blk/Silver Tourer (Valkylac)
1999 Grn/Silver Interstate
1999 Blk/Silver (Texas Bobber)
http://vrcc.photostash.com/vrcc_32720/xcd%2002022.jpg

Houdini

Quote from: Joevalk on Fri 12, Feb 2016, 19:06:18
Looken good :cooldude:
But why not more red lights in the front instead of blue?
I'd like to find me some lights that you have behind you front crank bolt cover :cooldude:

They didn't make the rotor cover lights in red, I assume due to laws about red lights on the front of vehicles, one of these days I may strip out the blue and add red.

The lights behind the bolt covers were once upon a time made by a Valk Club member out in Arizona, you could probably have a plastic shop make some for you, it's just a triangle-ish of plastic with some holes in it and a grove cut in the center to add some LED's.  I thought the white lights looked cool and are legal to have on any time I want them on.
"A Camera And A Bike....What More Do I Need?


RainMaker

Got it inspected and almost got it crashed by the inspector.  Story on General Board.


2005 BMW R1200 GS
2000 Valkyrie Interstate
1998 Valkyrie Tourer
1981 GL1100I GoldWing
1972 CB500K1

Snakedaddy

Got the radiator on that Christbiker  aka woody.  Past on to me put a new coolant fan motor on also now it works and put about 70 miles on her after it was finished. Ready for the rides
Live to ride

f-Stop

 
Had my blinker on across three states!

Disco

Congratulations, Charlie!   :cooldude:   I rolled 89K yesterday.
2000 Bumblebee Tourer, 98 Yellow & Cream Tourer, 97 Rescue blower bike
22 CRF450RL, 19 BMW R1250RT
78 CB550K, 71 MT50 Trailhopper


VRCC 27,916                  IBA 44,783

lucky_1_chris

#192
Haven't started the bike since May of 2015. Got it fired up this morning, took a while... Noticed the final drive is leaking. Not from the drain, but from the internal seals. Had a small puddle in the rear wheel, and oil is seeping up the outside of the swingarm. Nothing hit my garage floor, though. I guess they dried up/rotted. Who knows, but the seals are shot. I took it out for about 10 miles, got it good and warmed up. Had a chuckle at the difference in performance between the Valkyrie and the new bike. Really made me miss the Valk.

Changed the 2 yr. old oil (probably shouldn't have as it looks like I'll be draining it again before she goes back together), got it jacked up and got the front half of the bike torn down. Upon looking under the bike I was amazed at how bad she's gotten. I rode this bike almost all of the winter of 2014. Had a bad ice storm that year, and the salt they put down really did a number on the bike. Really. I didn't know that when I parked it for the last time before I bought the Wing, and when I realized what I'd done, it was too late. Damage was done. I'm actually ashamed that I let her get this bad. She'll be good as new soon enough, though.

I will say that most of the Honda chrome held up well, with the exception of the heat shields on the exhaust. All the aftermarket stuff is now garbage, including the Progressive 440's. (what a waste). The kickstand mount is pretty bad, some of the clutch cover bolts are worrying me as they're in really, really bad shape. Water pump bolts are also scaring me. I can't see any corrosion/rust on the frame, not yet anyway. Some of the screws on the airbox got it bad... Was developing a pretty bad wobble before I parked it, and with the wheel and fairing off the reason was evident. Steering head bearings are shot. With no weight on the forks it seemed like I could feel every bearing move. Out they come.

Anywho, I'll take care of all of it. Coming apart is easier than going back together, so I may the that guy with a ton of questions soon.

Pictures really don't do justice as to how bad she's gotten, but here's my progress. Next Sunday the back half of the bike comes apart and then I'll be dropping the engine for cleaning/repairing. Once all is cleaned and repaired, parts will go in for powder coating and paint. This will probably take me several months to complete.

It begins.





Running out of room.



To give an idea of how bad she's gotten...









New bike sans trunk.







1999 Valkyrie Interstate

2016 Victory Cross Country Tour

Houdini

#193
Added new master cylinder covers to my Standard

Need new screws...

And added some Texas pride to my Batwing.
"A Camera And A Bike....What More Do I Need?


The emperor has no clothes

Quote from: Houdini on Sun 28, Feb 2016, 13:03:18
Added new master cylinder covers to my Standard

Needs new screws...

And added some Texas pride my my Batwing.

Looks good.  :cooldude: I have a suggestion on the screws for your brake and clutch reservoirs. The screws on mine had a slight rusting from being wallowed out slightly with a screwdriver. I replaced them with stainless Allen head screws from Ace Hardware . They look pretty good in my opinion .

Houdini

QuoteLooks good.   :cooldude: I have a suggestion on the screws for your brake and clutch reservoirs. The screws on mine had a slight rusting from being wallowed out slightly with a screwdriver. I replaced them with stainless Allen head screws from Ace Hardware . They look pretty good in my opinion .

Are they countersunk?  Pics please.
"A Camera And A Bike....What More Do I Need?


The emperor has no clothes

Quote from: Houdini on Wed 02, Mar 2016, 19:15:58
QuoteLooks good.   :cooldude: I have a suggestion on the screws for your brake and clutch reservoirs. The screws on mine had a slight rusting from being wallowed out slightly with a screwdriver. I replaced them with stainless Allen head screws from Ace Hardware . They look pretty good in my opinion .

Are they countersunk?  Pics please.
yes, I'll go out and get a pic now. I'm not the speediest on this computer stuff, so bear with me.  :)

The emperor has no clothes



I`m also not the greatest photographer as you can see. Basically they are a countersunk allen screw the same as the phillips but they are also stainless. I got mine at Ace but I`m sure they are available at other hardware stores.  :cooldude:

Lyonardo

Wow. That's nice, man.
I'd have to do the same... if I had stacks.

Quote from: Houdini on Sat 25, Apr 2015, 08:52:29
Added LEDs to my stacks.

Before


After


JC showed me at the last wrench party that he installed some of these and I figured if JC could do it.....

Lyonardo

Installed new Cool White LEDs in my speedometer and tachometer.
They're much brighter, and much easier to read at night. I bought several brands, but went with the Cool White bulbs by superbrightleds.com.

  **On the left, original bulb from factory.
  **On the right, part# T10 5-5050SMD Cool White, sold by ARTR  on amazon.com

I didn't like either one of these.



  **On the left, part# WLED-CW5: Cool White, sold by superbrightleds.com
  **On the right, part# T10 5-5050SMD Cool White, sold by ARTR  on amazon.com

I liked the one on the left, so now both sides have that.