VRCC Calendar Ad

99 I/S gauges not working

Started by abrock52, Fri 15, Jan 2016, 11:13:16

Previous topic - Next topic

abrock52

I posted back in September about my speedometer, odometer, and tachometer not working.  I still have not found the problem! I have 14.5 volts coming out of the alternator.  I have 12v at the back of the gauge cluster and I have continuity between ground and harness at the back of the gauges. The trip shows the numbers but doesn't count accurate. Please help! Can't afford  $95/hrs to have dealer diagnosis. Plus I have checked all the fuses. I have been riding it since then with groups due to I have no speedometer

davit

I can't help you with the gauges but if you have a smart phone there are plenty of speedometer apps.  I use
a Ram Mount X-Grip to hold my phone.

abrock52

I have been using my phone. It works pretty good but I just like to have the gauges  fixed

mustang071965

#3
have you checked the speed sensor on the frt wheel. also crazy question, does your radio, fuel gauge and dig display work? or is just the clock showing?

gordonv

#4
You also haven't posted where you live yet. It might help a little if someone is close by.
1999 Black with custom paint IS


abrock52


Ricky-D

There have been quite a few reports of problems similar to yours regarding the interstate. Most all

have been traced to a connector wrapped inside of the protective factory covering that resides in

the area below and behind the battery box. Fixing the connection THERE has been the cure.

Search and you may find other relevant threads.

***
2000_Valkyrie_Interstate