http://www.formotionproducts.com/shop-1/http://www.formotionproducts.com/shop-1/compass-whiteMounting your Moto Compass
Mount the compass using the enclosed brass "L" bracket.
Secure the notched end of the L bracket to a 1/4 inch screw or bolt on the vehicle with the large opening of the bracket on top, ideally a windshield acorn bolt or switch housing screw.
Slide the compass stem bottom into the large opening on the L bracket. Once sitting atop the "L" bracket, slide the black plastic spacer over the compass stem and secure using the enclosed washer and short sockethead screw.
All our gauges are waterproof and the compass is no exception. Special consideration in wet conditions is unnecessary.
Remember; mount the compass as level as possible so that the rotating internal indicator does not hang-up on the glass and can spin freely.