Add on Lights

[Kidd]

Rear lights as tail , they brighten up a lot  when brakes are applied


Obviously , these are front lights  that work as turn signals  , too  .  When looking straight  at them  , they are really bright  , just a little to one side , they are not nearly as intense


And another photo with light  unlit


Here's the cover that makes them red , also , I purchased  some red plastic  material  from auto parts store , peel off the backing and it sticks to anything , designed to repair broken  lenses
https://www.amazon.com/DJI4x4-Light-Cover-8inch-Protection/dp/B01MU1B495/ref=pd_yo_rr_psims_t_1?_encoding=UTF8&psc=1&refRID=P3GWXCZQ4W9HZQPX7FRB

I should mention , front and rear lights  are controlled by separate Skene controllers that make the lights work as TS and brake light .        The controllers  make the lights work at about  50% brightness  and when you use TS or brakes , they come on all the way  , really gets peoples attention .
https://www.skenelights.com/

[Adirondack Bill]

Wow, I guess you really want people to see you coming and going!

[Kidd]

Well  , yeah ,  it's dangerous enough riding a motorcycle  ,  I'm gonna  make her as visible as possible  .That's why I painted her white , besides  , ain't  that usually the reason  we have accidents , they did not see us .
Being  61 , I can not afford the price of being in an accident  , besides , I witnessed an accident  in Sept  and I did not ride for 3 days because of it .
https://www.verdenews.com/news/2017/sep/16/motorcyclist-flown-hospital-after-sr-260-crash/?templates=desktop

Wow, I guess you really want people to see you coming and going!

[Kidd]

Guess I should add ,  the red  material I purchased from an auto parts store was used on the inside of the red plastic  lens  to make it more dark red , without it , the lights are too bright , did the same with the amber lens on the front  .
Also , I cut up a plastic  milk jug  the same size as the  front light &  fits nicely  with the help of a little tape , the purpose is to cut down on the intense  light from the light bar  , removed them recently and so far , so good , no one getting mad at the intensity  of the lights , I can always put them back later if needed

[Kidd]

Mine is not the only white one
https://www.youtube.com/watch?v=1lr6D1QuDqs
And
Looks like the Valk with be here for 2018
https://www.youtube.com/watch?v=ufdt_x9ELkQ

[bscrive]

Kidd,
Your bike still looks better.  That one looks unfinished.  He should have painted the side covers.

I didn't see any new Valk in the other video.  Just the same Valk that we have and the Rune.

[Robert]

GE Q4681 - 450w 28v PAR46 Sealed Beam Aviation Light Bulb

category: HALOGEN
volt: 28
amp: 16.1
watt: 450
base: Screw Terminals
glass: PAR46
filament: C6
fil.res.: 1.74 ohm
m.o.l.: 4.12 inch (104MM)
i.lumens: 3900000
cp: 310000
d.hours: 50

notes:

aircraft lamp
ba:15x9
landing lamp

I think these will fit the pods and although they are 28 volts you could step the voltage up with a transformer and at 3900000 lumens you would be easily seen

[Kidd]

Well , Bobby , I am not really wanting to come off  obnoxious  and piss folks off  , just get their attention .
Your idea would really be over the top ,  and I know  you're being  not very  serious

[Shrubbo]

Man you are mad.

I love it.

/takes down some notes.