Can someone measure their forks on their full Wing or F6B

[bscrive]

I am looking at putting on a Progressive fork kit for a full wing on my Valk.  What I need is for someone to measure the length of each fork.  I need the measurements where inner parts are, not where the wheel mounts.  Where the flat part of the lower part of the forks meet the rounded part of the lower part of the forks to the top of the forks at the top of the triple tree.

I hope I explained it right.   

Thanks,

Brian

[OnaWingandaPrayer]

You might look at a parts fiche and determine what parts are shared from a wing to the sister bikes.

[hubcapsc]

You might look at a parts fiche and determine what parts are shared from a wing to the sister bikes.

The outside of the forks is different... I looked on the fiche and the springs and the damper are different...
I didn't cross reference any other numbers...

-Mike

[bscrive]

I was able to get the measurement and our forks are just over 2.5" longer than the full Wing and F6B.