Web cam streaming from my garage

[Dag]

I`m working on my website with web cam streaming.
Ordered a new computer today. Intel Core i7 860 / 2.8 GHz Quad-Core Prosessor and 16GB RAM
and a web cam.  I will do some testing before I have my garage "online". I will have all the hardware in house during next week. I have planned to change fork seals live on my website.
This will be broadcast live without commercial breaks     if I get it to work 

[POPS 57]

Wow careful someone dosn't switch the feed to other rooms at your house.

[Mikey]

I wish I was to the point with my garage that I was thinking about adding a computer out there! 

[Dag]

Wow careful someone dosn't switch the feed to other rooms at your house.

It would definitely affect the popularity..  in one way or another 

[Dag]

I wish I was to the point with my garage that I was thinking about adding a computer out there!  

A few minutes of cleaning and dusting and it will be good.

[Jess from VA]

Dag, that sounds great.

But if that garage gets any cleaner it can probably be used for a hospital. 

What ever you do, don't have any strippers in there handing you the tools (without giving us plenty of advance notice).   

[NITRO]

I`m working on my website with web cam streaming.
Ordered a new computer today. Intel Core i7 860 / 2.8 GHz Quad-Core Prosessor and 16GB RAM
and a web cam. 

You think that's enough RAM? Cripes, I think I could run every program on my computer with that!

[Valker]

Will you also be able to record these for playback later? I will probably not be able to watch when you actually do these jobs, but I would love to gett to watch later.

[Ghost]

Hey Dream Maker, i would like to learn more about that. I would like to keep an eye on my garage and outside.

[hubcapsc]

Wow careful someone dosn't switch the feed to other rooms at your house.

With the power that massive computer must be drawing, better be careful someone doesn't
switch on the lights in any other rooms at your house 

-Mike

[Black Pearl's Captain]

Can you turn the camera onto my bike and change my fork seals?  

Good idea Dag.

Raymond

[ricoman]

fantstic
remember, we watch TV in our prime time slot-7PM to 11PM (est) here in the US.
I hope you can schedule your shows to fit-it'll be 1AM - 5AM for you 

[Scott in Ok]

I have been playing with web and IP cams for some time, they can be very handy. A HD friend of mine which lives in an other state bought a bunch accessories and was going to take to a HD dealer to have it installed because he wasn't super handy with mechanics. I convinced him he could do it himself. So we got our webcam connected and he pointed the webcam  at the area of the bike he was working  on , and I walked him through it, after a few hours he was done and saved a ton of cash. To my knowledge webcams can only go one on one with basic programs.  I use IP Network cams and multi users can watch at the same time and you don't need a have a computer to use it. They have there own built in sever just have to connect to a router either hard wire or wireless. I have two of them  and there not expensive. When I go for a cruse I take me netbook and I can logon to the IP netcams and check out the house.

Dan

Have a source for cheap IP Cams?  Brand? Model?

-Scott

[Blackduck KS]

Thanks thats a good Idea,
I need to do my brothers as well
this would come in handy when you get it posted some where,
would you put a link to it on the tech board would be greatly apperciated.

Blackduck

[czuch]

THATS A GARAGE?????????!!!!!!!!!!!!!!!!
THATS HOW THERYE SUPPOSED TO LOOK???????????????????????
I guess from now on I'll just refer to mine as a superfund candidate.

[Mikey]

Not much snow there either? I hate it when it teases like this... No snow, but way too cold to ride!

[2qmedic]

Well Dang Dag, that's an awesome idea!!!
Uhh, is this Pay Per View???
Seriously, I think you're on to a great thing here.  Just so happens that I have been wanting to install Progressive springs up front.
I will be watching this thread with great interest.

[fudgie]

Wow, usually you have to pay to see web cams! 

[Dag]

Will you also be able to record these for playback later? I will probably not be able to watch when you actually do these jobs, but I would love to gett to watch later.

I'm testing some software now, and it looks like it's possible. But if it's streaming one hour it will be a very large file, and it will not be an action moovie.
Than it's better to videotape the work and edit the video to max five minutes and upload it to YouTube

[Dag]

Well Dang Dag, that's an awesome idea!!!
Uhh, is this Pay Per View???
Seriously, I think you're on to a great thing here.  Just so happens that I have been wanting to install Progressive springs up front.
I will be watching this thread with great interest.

I will announce it here when happens.
I think it will work in a couple of weeks.

I think the time difference are 6 to 8 hours , so I will do this late evening Norway time.

[BonS]

user ID: linkcam

password: password

Dan

I tried, either the ID or password is not quite right.

[Dag]

fantstic
remember, we watch TV in our prime time slot-7PM to 11PM (est) here in the US.
I hope you can schedule your shows to fit-it'll be 1AM - 5AM for you 

If I use a really SLOW connection, maybe the delay could be about 6 hours   

[Dag]

Well Dang Dag, that's an awesome idea!!!
Uhh, is this Pay Per View???
Seriously, I think you're on to a great thing here.  Just so happens that I have been wanting to install Progressive springs up front.
I will be watching this thread with great interest.

Starting the work with changing the fork seals now... 
Take everything apart now, and put the new ones on tomorrow

[matt]

nice i will be waiting to watch  once again awesome garage   mine is outside we hit 40 today