Give away to VRCC Riders.

Chrisj CMA · Wed 13, Jan 2010, 07:27:01

Quote from: f6john on Wed 13, Jan 2010, 07:04:32
Quote from: Chrisj CMA CR3M on Tue 12, Jan 2010, 16:03:29
If all my parts show up tomorrow...I will have some parts to toss in the pile. Ill list the ones with minor damage on them first.

--Valve cover....has tiny pepper marks from being too close to the gravel while she slid.....it never hit
the ground just got peppered a tad....if you busted one this will get you rolling again
--handlebars ....very small scratches on the right side.....so light, I almost didnt get a new one....
--Ultimate Passenger backrest....very slight tear in the backing material.......should be easy to fix if you
do any upolstery at all
Fairly perfect items

--gas tankbase (the part the cap screws through
--one Original Cobra Light bar spot light with a 55W CB and a brow
--left side crash bar chrome is just not as sparkly as new, but looks good
--timing belt cover chrome is just not as sparkly as new, but looks good
--Grip stuff: new throttle grip...end cap from clutch side
--fuel selector switch for the petcock

I'll take the timing belt cover if you still have it. I have a J&M 3 pocket windshield pouch to offer up.

Sorry its gone....

Chrisj CMA · Wed 13, Jan 2010, 07:30:24

Ok guys and gals......the backrest,left crash bar and timing cover are spoken for......thanks

Spirited-6 · Wed 13, Jan 2010, 08:40:14

NOW, that`s more like it.

Keep it coming !!!

roboto65 · Wed 13, Jan 2010, 08:44:11

Not to take away from this but on another forum I visit we have a Pay in Forward section maybe we could have something like this for all when we have stuff to give to other members.

Chrisj CMA · Wed 13, Jan 2010, 12:17:52

Quote from: Chrisj CMA CR3M on Tue 12, Jan 2010, 16:03:29
If all my parts show up tomorrow...I will have some parts to toss in the pile. Ill list the ones with minor damage on them first.

--Valve cover....has tiny pepper marks from being too close to the gravel while she slid.....it never hit
the ground just got peppered a tad....if you busted one this will get you rolling again
--handlebars ....very small scratches on the right side.....so light, I almost didnt get a new one....
--Ultimate Passenger backrest....very slight tear in the backing material.......should be easy to fix if you
do any upolstery at all
Fairly perfect items

--gas tankbase (the part the cap screws through
--one Original Cobra Light bar spot light with a 55W CB and a brow
--left side crash bar chrome is just not as sparkly as new, but looks good
--timing belt cover chrome is just not as sparkly as new, but looks good
--Grip stuff: new throttle grip...end cap from clutch side
--fuel selector switch for the petcock

Whover asked about the grips and end cap....I have the brand new throttle grip (no sleeve) and both end caps

Jess Tolbirt · Wed 13, Jan 2010, 21:11:12

Quote from: scoot on Wed 13, Jan 2010, 06:39:06
Quote from: Jess Tolbirt on Tue 12, Jan 2010, 21:44:50
something i can give away is i have a leather strap that goes down the gas tank,, you know the one that fits around the gas cap and reaches from top to bottom? i think its about 6 inches wide or so.. has a little pouch thingy to put your cigs in too..
sorry i cant think what it is called but if some one wants it i will dig it out as soon as it warms up out there a little....
Jess,
I would like to have this if you still have it. I will send you email

hey Scoot,,, my email to you was rejected,,,email me your address,,,,
Jess

doubletee · Thu 14, Jan 2010, 08:59:28

I have several things I can post for the giving. Just saw this thread today. I'll try to photograph them tonight and post them tomorrow.

T-Bird · Thu 14, Jan 2010, 14:14:25

QuoteGuess I should apologize for not gettin' back to ya sooner. Got the levers. Thank you !
The only thing I've been able to find is a set of stock passenger pegs. If anyone wants them PM me your addy.

Hey Ron, If they haven't been spoken for I could use the left rear peg. I also have 2 front turnsignal stems for someone, leftover from adding cobra spotlights to another bike.

Terry

Bladedog · Thu 14, Jan 2010, 14:32:40

Quote from: T-Bird on Thu 14, Jan 2010, 14:14:25

QuoteGuess I should apologize for not gettin' back to ya sooner. Got the levers. Thank you !
The only thing I've been able to find is a set of stock passenger pegs. If anyone wants them PM me your addy.

Hey Ron, If they haven't been spoken for I could use the left rear peg. I also have 2 front turnsignal stems for someone, leftover from adding cobra spotlights to another bike.

Terry

Would those fit a Standard? Does that include the rubber "stay" between the fork clamp and the chrome part?

T-Bird · Thu 14, Jan 2010, 14:37:04

Quote from: Bladedog on Thu 14, Jan 2010, 14:32:40
Quote from: T-Bird on Thu 14, Jan 2010, 14:14:25

QuoteGuess I should apologize for not gettin' back to ya sooner. Got the levers. Thank you !
The only thing I've been able to find is a set of stock passenger pegs. If anyone wants them PM me your addy.

Hey Ron, If they haven't been spoken for I could use the left rear peg. I also have 2 front turnsignal stems for someone, leftover from adding cobra spotlights to another bike.

Terry

Would those fit a Standard? Does that include the rubber "stay" between the fork clamp and the chrome part?

Yes....just don't have the screws that clamp them on with...must have used them on something else.

Bladedog · Thu 14, Jan 2010, 18:26:38

T-Bird, sent you a PM.

T-Bird · Thu 14, Jan 2010, 20:47:28

Thanks Normandog,
I'll send you my address.

Blackdog,
send me your address

Terry

Bladedog · Fri 15, Jan 2010, 00:08:47

Quote from: T-Bird on Thu 14, Jan 2010, 20:47:28
Blackdog,
send me your address

Terry

I assume you meant me... lol. Sending my address...

doubletee · Fri 15, Jan 2010, 06:58:13

All from '99 Std:
Stock passenger foot pegs
Stock clutch and front brake levers (leather wraps can easily be removed)
Stock clutch and front brake master cylinder covers (includes stock screws)
Stock horn (bug guts included!)

GreenLantern57 · Sat 16, Jan 2010, 20:49:17

Had light laydown. Have the right side mirror available for anyone. I broke the left and am going to replace with a different pair.
Here is a good pic on the J&P site. Remember, not new but it is in very good shape.

http://www.jpcycles.com/search/productdetail?sku=760-057&N=36370+28004526&Ntt=pro-one+mirror&Ntk=All&Ne=0&Nao=10&fitment=1&brand=0&results=100

grey ghost · Sun 17, Jan 2010, 20:57:42

I am looking for a stock standard front seat for a valkyrie..rgoakes@yahoo.com

Smokinjoe-VRCCDS#0005 · Sun 17, Jan 2010, 21:09:16

Quote from: grey ghost on Sun 17, Jan 2010, 20:57:42
I am looking for a stock standard front seat for a valkyrie..rgoakes@yahoo.com

I've got one off a 1998 model they are kinda flat and uncomfortable the better one did'nt show-up to around 2000 .

Cyclejohn · Mon 18, Jan 2010, 17:01:42

I have a set of exhaust tips off my '97 tourer if anyone needs them. The're in great shape (not perfect - just great). Thanks, John

Bladedog · Mon 18, Jan 2010, 17:44:26

Quote from: CYCLEJOHN on Mon 18, Jan 2010, 17:01:42
I have a set of exhaust tips off my '97 tourer if anyone needs them. The're in great shape (not perfect - just great). Thanks, John

I can use those! Sending you a PM.

I also have a rear axle from a 2000 I/S if anyone needs it.

grey ghost · Mon 18, Jan 2010, 18:33:55

Joe, I think that it will work for me< the seat....grey ghost, will send you a email

Smokinjoe-VRCCDS#0005 · Mon 18, Jan 2010, 18:48:58

Quote from: grey ghost on Mon 18, Jan 2010, 18:33:55
Joe, I think that it will work for me< the seat....grey ghost, will send you a email

OK It will be friday before I can get it boxed and shipped. I work on the road and will be hitting said road here in a few.

fudgie · Tue 19, Jan 2010, 10:12:19

I have a black HJC fullface helmet with tinted shield for free. It L or XL, I'll have to look. Its in good shape except for the bottom. Its got a burn/melted edge, long story, approx 2" long. Can't see when on. Would make a good travel helmet, snowmobiling, or etc. Wore off and on for 3 yrs. Been on the shelf since 2000, covered.

Chrisj CMA · Tue 19, Jan 2010, 15:36:05

Your parts are in the mail.....3-4 days or so cept Adrian, I mean Canada is like a whole different country and everything........lol

Willow · Tue 19, Jan 2010, 15:43:31

We have a Leatherlyke left bag (old style) that has had the MarkT mod done.

We have a set of Leatherlyke bags with mounting hardware that are slightly cracked. They can be repaired and should have the MarkT mod applied.

fudgie · Tue 19, Jan 2010, 17:03:09

Quote from: Willow on Tue 19, Jan 2010, 15:43:31
We have a Leatherlyke left bag (old style) that has had the MarkT mod done.

We have a set of Leatherlyke bags with mounting hardware that are slightly cracked. They can be repaired and should have the MarkT mod applied.

MarkT mod? ???

Willow · Tue 19, Jan 2010, 17:21:36

Quote from: fudgie on Tue 19, Jan 2010, 17:03:09MarkT mod? ???

The older Leatherlyke bags had a tendency to crack at the mount points. Mark Tobias reinforced his to circumvent this weakness.

MarkT's LeatherLyke Reinforcement Modification

Spirited-6 · Wed 20, Jan 2010, 08:07:37

Quote from: CYCLEJOHN on Mon 18, Jan 2010, 17:01:42
I have a set of exhaust tips off my '97 tourer if anyone needs them. The're in great shape (not perfect - just great). Thanks, John

Dang It. Missed these.

anyone else have some tips laying around.

scoot · Wed 20, Jan 2010, 10:17:50

Quote from: Spirited-6 on Wed 20, Jan 2010, 08:07:37
Quote from: CYCLEJOHN on Mon 18, Jan 2010, 17:01:42
I have a set of exhaust tips off my '97 tourer if anyone needs them. The're in great shape (not perfect - just great). Thanks, John

Dang It. Missed these. anyone else have some tips laying around.

I do. Email me your address, jklein@iserv.net ,and I will see if I can dig them up
Scott

Grumpy · Wed 20, Jan 2010, 18:58:49

I have a rear brake rotor, fairly good shape, measures 8.3 mm thickness. Some very light grooves, not enough to cause a problem. I believe it is for an older model Valkyrie, bought it for My 99 interstate, and the offset is different. Some one have an idea what year it fits ?.Glad to give it to a new home, just decorating my shop wall now.

Spirited-6 · Thu 21, Jan 2010, 08:20:37

Quote from: scoot on Wed 20, Jan 2010, 10:17:50
Quote from: Spirited-6 on Wed 20, Jan 2010, 08:07:37
Quote from: CYCLEJOHN on Mon 18, Jan 2010, 17:01:42
I have a set of exhaust tips off my '97 tourer if anyone needs them. The're in great shape (not perfect - just great). Thanks, John

Dang It. Missed these. anyone else have some tips laying around.

I do. Email me your address, jklein@iserv.net ,and I will see if I can dig them up
Scott

Thanks Scott. Address sent. Make sure you sent your addy with.

GreenLantern57 · Thu 21, Jan 2010, 21:25:02

Quote from: Chrisj CMA CR3M on Tue 19, Jan 2010, 15:36:05
Your parts are in the mail.....3-4 days or so cept Adrian, I mean Canada is like a whole different country and everything........lol

Part came in today! wHOOO!!!! Looks just like the right side. Bet I can spend some time with the polish and make it look just fine! Thanks again! This board rocks!

Chrisj CMA · Thu 21, Jan 2010, 21:36:25

Good Deal

sounds like it found a happy home

Spirited-6 · Fri 22, Jan 2010, 09:37:58

Valkyrie riders are doing "better" with the free stuff.

We add bling / acc`s to our Valk.`s and put take off`s on the shelf. For what ? Are we going to put them back on ? I know you think you will list on Ebay and sell but have you ? Come on, make someone happy !

Thanks to all that have offered items.

OOPS. In my haste in posting, I forgot I have a OEM drivers seat off my 98 Tourer that is a great shape. Anyone ???

Spirited-6 · Fri 22, Jan 2010, 11:43:54

Seat gone to Mikey, VRCC 30782. Enjoy Mikey.

Mikey · Fri 22, Jan 2010, 11:46:08

Thanks a bunch!

I'm hoping to get me some chrome for my birthday so I can post something on here for y'all!

doubletee · Sat 23, Jan 2010, 06:54:34

Quote from: doubletee on Fri 15, Jan 2010, 06:58:13

All from '99 Std:
Stock passenger foot pegs
Stock clutch and front brake levers (leather wraps can easily be removed)
Stock clutch and front brake master cylinder covers (includes stock screws)
Stock horn (bug guts included!)

Passenger foot pegs are gone.

Normandog · Mon 25, Jan 2010, 18:45:50

Quote from: T-Bird on Thu 14, Jan 2010, 14:14:25

QuoteGuess I should apologize for not gettin' back to ya sooner. Got the levers. Thank you !
The only thing I've been able to find is a set of stock passenger pegs. If anyone wants them PM me your addy.

Hey Ron, If they haven't been spoken for I could use the left rear peg. I also have 2 front turnsignal stems for someone, leftover from adding cobra spotlights to another bike.

Terry

FINALLy !!! Got them mailed today Terry. I sent both cause I couldn't tell which was one left and which one was the other left. $:-\$ Just keep the one you don't need, pass it on to someone else or bring it with you sometime when we're gonna be ridin.

T-Bird · Mon 25, Jan 2010, 19:27:59

Thanks Ron. Let me know how much I owe you for shipping.

Spirited-6 · Wed 27, Jan 2010, 11:07:20

Quote from: Mikey on Fri 22, Jan 2010, 11:46:08
Thanks a bunch! I'm hoping to get me some chrome for my birthday so I can post something on here for y'all!

Mikey, sent you a Email and it bounced back. Seat sent UPS today. I have a track No.
Let me hear from you.

Bladedog · Wed 27, Jan 2010, 18:09:58

Just throwing this out there again in case someone needs it and missed it before... I have a rear axle from a 2000 I/S.

News:

Give away to VRCC Riders.