News:

If you're new to this message board, read THIS!

Main Menu
VRCC Calendar Ad

air box install

Started by groundpounder01, Tue 30, Mar 2010, 19:04:32

Previous topic - Next topic

groundpounder01

Can anyone tell me how far the air box tubes fit on the carb. tops. Don't remember how it was when I removed it. There is a ridge on the carb. tops, does this ridge mean stop or does that hold it in place on the inside of the tube. A pic would be very helpful.

Thunderbolt

the bands tighten it on metal tube.

stevelp

I think there is an article in shoptalk about the air box.

NITRO

I THINK the boots are supposed to fit down snug to the "lip" on the carb. That said, my boots slid up a bit, especially on the front, the two times I have had my box out.
When in doubt, ride.

groundpounder01

I slid the boots down to the ridge on the carbs, but alittle push with the finger and they pop off. Clamps are tight , thats what makes me think they go all the way down. Could look at another bike but i'm a lone ranger with the valk around here.

Ricky-D

The rubber boots are indexed so as to assure they are properly installed.

The clamps are piloted so they are in the proper relationship to the rubber boots when tightening.

You need to look at them and you'll see what I am talking about.

***
2000_Valkyrie_Interstate