WANTED TO BUY - brake - clutch master cylinder controls

[thewoodman]

Put this in the classifieds earlier, so here goes:
   
I'm looking for a brake - clutch master cylinder control set for my '97 Tourer. It started with a small seeping leak from the site glass on the clutch side and went sideways from there. Try to find 17mm site glass. Bought a pair of aftermarket controls and although the brake works fine, the clutch does not function with the correct stroke-pull action as stock. It you have a set, hit me up.

woodman

[Lucky Duck]

I've seen guys replace the sight glass with a dime. You loose the function of the sight glass but it looks kinda cool. I don't know how they held the dime in place, maybe JB Weld or something similar. This is assuming that the only problem is a sight glass that leaks.

[thewoodman]

I'll have to give that a look since I now have a variety of stuff to play with. Thanks for the idea.

[Valkorado]

https://www.ebay.com/itm/1Set-17mm-Brake-Master-Cylinder-Reservoir-Sight-Glass-Motorcycle-Dirt-Bike-Gaske-/193703706603?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[thewoodman]

Thanx for that. I ordered two sets but their arrival time isn't until November sometime. It's all good and
just a thing. I found a 2001 Goldwing clutch master cylinder on Pinwall yesterday and although the brake line bung is 90 degrees off, it's worth a shot for $13 bucks.

[agrady1995]

Rebuilt mine 2x now. If you want to swap I can mail you out a rebuilt set. Let me know.

Kilroy