carb "o"rings

[art]

anybody know where I can get the  o rings that seal the carb. bowls

[98valk]

if K&L doesn't have them, then it will be a dealer item.

http://www.powersportsuperstore.com/SearchResults.asp?Search=bowl+gaskets&Search.x=23&Search.y=9

this is the tuckerrockey catalog which carries most of the k&L parts.

http://www.klsupply.com/   their site is not good so contact them, they are then very helpful

www.sudco.com    another possible source

[John U.]

I believe Sudco does have them. Try stock # 021-874 at Sudco.com

[Jeff K]

Any hardware store Dash # 123

[art]

thanks I will try them an see if I can get any

[BonS]

You might give this link a try. http://redeye.ecrater.com/product.php?pid=2064055

[John U.]

Art, In your original post I understood you were asking about the float bowl O-rings. If yhat is the case you don't have many options. Redeye can provide intake runner O-rings (that's the 123 ones) or he can provide a full set to rebuild all the carbs, except for the float bowl.
HDL can provide them for about 50 bucks for the 6, or you can try Sudco. I would call them and ask if the number I mentioned is correct.
Good luck

[art]

thanks I can always buy an "o" ring kit from an industrial supply house like granger an then I will have all the "o" rings I want.Anyway thanks again