velocity stacks on the cheap

[scoot]

Several people have asked about these, so I thought I would just put it out here:
After ordering the velocity stacks from HDL, and then being told we'll ship them when we ship them I decided I would just get creative. I started out with 6 chrome exhaust tips. I think they were 1 7/8". I cut them down so they would just fit under the tank. I then painted the insides with black paint. I then used alum. window screen and pressed it over another spray paint can cover to form a dome shape. I cut them so they fit just inside the tips. I used silicone sealer to hold them in place. I then used silicone to hold them in place on the carb covers. I think I have maybe $50 in these.
I next ones I plan to add LEDs to the inside of them. I hope to make them flash.
Hope this helps.

[Gear Jammer]

I like those better than velocity stacks    Great job,,,

[BonS]

I second that! I like 'em better. 

[Big Ed]

Awesome Job...!!!             

[WarrenK]

Verry nice!  Is Mark T making a kit for LED lights for these? Anyone heard if they are available?

[BonS]

The last I heard Mark T is still working on that.

[rmrc51]

If someone winds up making these, I'll buy a set!  

[GreenLantern57]

Nice change!

[Big Ed]

Nice job on these.

I followed your specs, added some LEDs and here is a video of my "work in progress".

Hope to mount them tomorrow

Velocity Stack with LEDs

Cheers...!!!

[fordmano]

Hmmm! I think I like those? Especially if I or someone can come up with an easy to install and cool looking LED setup.

I think you guys are on to something here!!!!

[scoot]

  Nice job. What did you use for your leds to make them flash?

[Gear Jammer]

Nice job on these.

I followed your specs, added some LEDs and here is a video of my "work in progress".

Hope to mount them tomorrow

Velocity Stack with LEDs

Cheers...!!!

Wow, I'd like to see those lights playing to Metallica   

[F6BANGER]

Is this what you are using to make it flash?

http://www.ebay.com/itm/6-Ways-LED-Light-Flasher-Flash-Strobe-Controller-Box-/180809957132?pt=LH_DefaultDomain_0&hash=item2a191cff0c

[hooptycuztom89]

wish i would have thought of this i just put another set of filters on top of mine, ill have to remember this for next time. i like it looks good

[larue]

awsome creativity...

[Big Ed]

I'm using an "LED Quadra Strobe Module" by "Pilot" that Autozone sells for $25. It come with 4 white LEDs. It cut those off and spliced in the red ones that purchased separately.

Ed...

[jbryantjr]

I like the looks of the V-Stacks - just not sure what I got. I have a 2002 Tourer and the carb covers I measure are 2 1/4 at the base. The questions I have is will silcone really hold those dudes on. I don't want to put something on that will just fall off first time somebody touches them ? Guess I could buy me another set of carb covers - tack weld them on the inside of the pipe and screw them down - but if I'm gonna go through all that trouble I may as well just buy the V-Stacks for a couple hundred bucks. They seem to be pretty elusive though. Just asking -

Big Daddy Bubba