Inzane 17

Difference between I/S forks and Standard forks?

Started by ValkSmile, Wed 05, Aug 2009, 13:54:00

Previous topic - Next topic

ValkSmile

Does anyone know if I can use Standard forks on an I/S? Is there any difference in the two forks?

Thanks

DFragn

Different P/N's between the 2 models. My guess would be the springs.
You should be ok to use the Standard tubes if you need to.
May be a little softer tho. You could add an ounce of fluid to each tube to improve the compression feel. That would decrease the amount of air in the tubes for compression.
Or install Progressive springs, which some then decrease the fluid by an oz. or 2. I/S brackets and such will change out.
Many have added heavy fairings to Standards and I don't recall any suspension issues.

Remember: air compresses - fluid does not.

quexpress

Quote from: ValkSmile on Wed 05, Aug 2009, 13:54:00
Does anyone know if I can use Standard forks on an I/S? Is there any difference in the two forks?

Thanks
It shouldn't be a problem.
Note: I went the other way (I/S forks installed on Tourer) but already had Progressive springs. I have not noticed any differences in handling, etc.
I still have a full deck.
I just shuffle slower ...