Inzane 17

New Frogg Toggs??........

Started by Stanley Steamer, Fri 22, Nov 2013, 17:09:22

Previous topic - Next topic

Stanley Steamer

"Santa" wants me to give him some ideas on presents this year......one thing I could really use is a new set of Frogg Toggs......motorcycle specific......my pants have a hole in them from touching the pipes..... :(.....seems like I saw a post where someone had ironed some ironing board material on the inside of the leg?.....I don't see that on this link.....makes perfect sense to me......I would have thought they'd have done this upgrade by now......

http://www.froggtoggsraingear.com/HornyToadz.shtm
Stanley "Steamer"

"Ride Hard or Stay Home"


saddlesore

 I got a hole melted into the sleeve somehow.  It didn't take much to melt it.  I'm think that trying to iron on a patch might melt more of the material.
DARE TO BE DIFFERENT

Oss

Stan  I used duct tape on the inside of the suit

It held thru a few rainstorms   I know I am an honorary redneck, strider told me so
therfore it must be true

The trick is to stop and put them on B E F O R E the toad strangler starts

mostly when I put em on the sun comes out

probably because I dont ride with Detn8er
If you don't know where your going any road will take you there
George Harrison

When you come to the fork in the road, take it
Yogi Berra   (Don't send it to me C.O.D.)

Stanley Steamer

Quote from: saddlesore on Fri 22, Nov 2013, 17:43:21
I got a hole melted into the sleeve somehow.  It didn't take much to melt it.  I'm think that trying to iron on a patch might melt more of the material.

I meant that it was sewn on........ :-[
Stanley "Steamer"

"Ride Hard or Stay Home"


Stanley Steamer

#4
Quote from: Oss on Fri 22, Nov 2013, 18:13:23
Stan  I used duct tape on the inside of the suit

It held thru a few rainstorms   I know I am an honorary redneck, strider told me so
therfore it must be true

The trick is to stop and put them on B E F O R E the toad strangler starts

mostly when I put em on the sun comes out

probably because I dont ride with Detn8er

putting them on BEFORE it rains guarantees that it WON'T rain...... :D........I like the FT's I have now.....pumpkin orange........rode to MS with Smokin Joe and company a few years ago .....about 500 miles of mostly pouring rain......only got a little water leaking in around my neck...... :cooldude:
Stanley "Steamer"

"Ride Hard or Stay Home"


..

#5
I had to duct tape my FT's inner right leg whilst at the Motel 6 in Jackson Hole, WY.

I WILL NEVER BUY ANOTHER PAIR.

I found that after a few thousand miles of wear and getting buffeted they leaked like a sieve. Now I use a Nelson Rigg 2 piece which has never let me down in the last 4 years of extensive use.
ps

Most expensive Motel 6 I've ever stayed at  :o

EDIT

The Nelson Rigg works really well as a cold weather layer.

On my cross country ride last year I took my mesh jacket, Gerbing liner and Nelson Rigg 2 piece. Dry and toasty no matter the weather.

3fan4life

You of ALL PEOPLE don't need something called, "HORNY TOADZ"   :evil:  :evil:
1 Corinthians 1:18


Stanley Steamer

Quote from: 3fan4life on Fri 22, Nov 2013, 20:33:26
You of ALL PEOPLE don't need something called, "HORNY TOADZ"   :evil:  :evil:

if the Ladies kiss me, I turn into a Prince!!......... :cooldude: :D
Stanley "Steamer"

"Ride Hard or Stay Home"


3fan4life

Quote from: Stanley Steamer on Fri 22, Nov 2013, 20:50:03
Quote from: 3fan4life on Fri 22, Nov 2013, 20:33:26
You of ALL PEOPLE don't need something called, "HORNY TOADZ"   :evil:  :evil:

if the Ladies kiss me, I turn into a Prince!!......... :cooldude: :D

:evil:  :evil:  :evil: I figured that they got warts.  :evil:  :evil:  :evil:
1 Corinthians 1:18


fudgie

What about them clear patches that you put on a pool floatie that has a hole in it?


Now you're in the world of the wolves...
And we welcome all you sheep...

VRCC-#7196
VRCCDS-#0175
DTR
PGR

R J

Quote from: Stanley Steamer on Fri 22, Nov 2013, 18:26:40
Quote from: saddlesore on Fri 22, Nov 2013, 17:43:21
I got a hole melted into the sleeve somehow.  It didn't take much to melt it.  I'm think that trying to iron on a patch might melt more of the material.

I meant that it was sewn on........ :-[


I have the inside of both legs about 6 to 8" up from the cuff duct taped on the inside.    I've hit a hot pipe with it a couple of times since and no more burn holes.     Hell of a lot easier than trying to sew a patch in there.
44 Harley ServiCar




 


MarkT

I had ironing board covers sewed on mine years ago.  Worked great.  FT has since come out with a much heavier duty rainsuit.  I got one and used it on my Canada trip 3 years ago.  This is actually very well made raingear.  I didn't get wet at all.  Much better than the lightweight stuff they have sold for years.  Got mine in charcoal grey - it has reflective piping on it.  And no leaks.

As for melting your raingear on your pipes.  You need my 5 inch pipes.  They don't get hot.

Vietnam-474 TFW Takhli 9-12/72 Linebckr II;307 SBW U-Tapao 05/73-4

santa

Stanley
Stop touching yourself and you won't get holes in them. Now if you are a good boy I'll try to give you a pair this Christmas? You must be good!!!!!

Santa

cookiedough

don't drive in the rain, problem solved?   :-\

ricoman

frogg togs come in several grades
look here for some good prices and they sell a Frogg Tog heat shield product.
http://www.motorcyclegear.com/street/raingear/all_types/frogg_toggs/
most of what they sell is stuff that has been superceded by new models so if you don't need to be on the cutting edge of style, you can get really good deals
take personal responsibility and keep your word



98 Tourer, black and chrome, added 8/11/10
98 Std, yellow/cream, totaled 8/3/10