Vacuum & fuel lines

[The emperor has no clothes]

I think I'm gonna put a Dan Marc on the I/S. also replace fuel & vacuum lines. It's already been desmogged. Was wondering what the best lines, what sizes, and where to get them. Thanks, Rob

[BigMac (SoCal)]

Here's my suggestion, You can get the fuel lines at any auto parts. I would replace the T with a brass one since the Danmarc valve is brass. I also put an inline fuel filter in front of the valve. It's part no. Wix 33049 . I got the fittings at Ace hardware. I also went one step more and replace my petcock with a pingle manual. I leave it on reserve all the time since I have a fuel gauge.   I replaced all clamps with small hose clamps.

Dave

You can call me if you have any questions.

[The emperor has no clothes]

Sounds good thanks Dave 

[R J]

I think I'm gonna put a Dan Marc on the I/S. also replace fuel & vacuum lines. It's already been desmogged. Was wondering what the best lines, what sizes, and where to get them. Thanks, Rob

Make sure the fuel line and all of its partners, run downhill.    It will starve for fuel if it has a rise in the line from the tank to the fuel rail.